The CPSC logged more than a dozen power tool and outdoor equipment recalls in the past 12 months, covering hundreds of thousands of units from household brands including Ryobi, Ridgid, Milwaukee, DEWALT, and Makita. Largest among them: about 764,000 Ryobi electric pressure washers recalled after capacitors overheated and exploded, injuring 32 people. If you own power tools purchased in the last several years, this page gives you the complete recalled power tools list organized by brand, the exact model numbers to check, and the step-by-step process for filing a claim or getting a free replacement.
Table of Contents
- How to Check If Your Tool Is Recalled
- Major Power Tool Recalls by Brand
- What to Do If You Own a Recalled Tool
- How Recalls Work: The CPSC Process Explained
- Safety Tips While Waiting for a Replacement
- Frequently Asked Questions
How to Check If Your Tool Is Recalled
The fastest way to check any tool is the CPSC recall search at cpsc.gov/Recalls. Enter the brand name or product type in the search bar, and filter results by date to see the most recent notices. The CPSC database includes every recall announced in cooperation with manufacturers going back decades, and it gets updated each time a new recall is announced.
Most major brands also run their own recall portals. Ryobi’s is at ryobitools.com/recall, Ridgid’s is at powertools.ridgid.com/pages/recall, Milwaukee’s is at milwaukeetool.com/support/recall, DEWALT’s is at dewalt.com/support/safety-notices-and-recalls, and Makita’s is at makitatools.com/recall. These brand pages often include serial number lookup tools so you do not have to read through long number ranges manually.
To check any tool, locate the data plate or model label, which is typically on the side of the housing, the bottom of the tool, or inside the battery bay. Write down the full model number and serial number before you search. A mismatch of even one digit means your specific unit is likely outside the affected serial number range, so accuracy matters.
Major Power Tool Recalls by Brand (2025-2026)
Six active recalls from this period cover tools still in millions of garages and workshops. The table below summarizes the key facts for the tool recall check process. Full details follow each entry.
| Brand | Product | Recall Date | Units | Hazard | Remedy |
|---|---|---|---|---|---|
| Ryobi | Electric Pressure Washers (RY142300, RY142711VNM) | Aug 28, 2025 | ~764,000 | Capacitor explosion / projectile | Free repair kit |
| Ryobi | 40V 24″ Cordless Hedge Trimmers (RY40620VNM, RY40602VNM, RY40602BTLVNM) | Jun 12, 2025 | ~113,000 | Unexpected blade activation / laceration | Free replacement |
| Ridgid | 18V Brushless Framing Nailers (R09894, R09895) | Jul 31, 2025 | ~64,000 | Involuntary nail discharge / laceration | Free firmware repair |
| Milwaukee | M18 FUEL Top Handle Chainsaws (2826-20) | Oct 30, 2025 | ~90,860 | Chain brake failure / laceration | Free repair |
| DEWALT | Grinder Flap Discs (DWA8280HRT, DWA8280RT) | Jul 3, 2025 | ~17,680 | Abrasive flaps detaching / laceration | Refund |
| Makita | Cordless Grease Guns (XPG01S1, XPG01SR1, XPG01Z) | Sep 4, 2025 | ~62,927 | Hose failure / grease ejection / laceration | Free replacement hose |
Ryobi Recalls
Ryobi’s August 2025 pressure washer recall is the largest power tool recall of the year. The internal capacitor on models RY142300 and RY142711VNM overheats and bursts, ejecting parts at high speed. TTI reported 135 overheating incidents, 41 explosions, and 32 injuries including fractures and cuts to fingers, hands, face, and eyes. These washers were sold at Home Depot and Direct Tools Factory Outlet from July 2017 through June 2024 for $300 to $400. Stop using the tool and visit ryobitools.com/recall to receive a free replacement capacitor kit, with shipping and installation instructions included. No proof of purchase is required.
A second Ryobi recall covers about 113,000 40V 24-inch hedge trimmers (models RY40620VNM, RY40602VNM, and RY40602BTLVNM). With this defect, the blade activates when either the safety or trigger is pressed alone, rather than requiring both simultaneously. Twenty-seven incidents were reported, including 16 injuries with minor to severe lacerations. The recall date is June 12, 2025, and the remedy is a free replacement trimmer. Return shipping is prepaid and no receipt is needed.
Ridgid Recall
The Ridgid 18V Brushless Framing Nailer recall (July 31, 2025) covers models R09894 (21-degree) and R09895 (30-degree), totaling about 64,000 units sold at Home Depot from July 2021 through May 2025 for $329 to $389. The dual-action engagement system has a documented malfunction where a nail discharges when only the trigger is pulled, without the nose-piece making contact. No injuries have been reported yet, but the hazard is serious. TTI will send a prepaid return label, update the firmware, and ship the tool back at no cost. Check powertools.ridgid.com/recall to confirm whether your serial number falls in the affected range.
Milwaukee Recall
Milwaukee recalled approximately 90,860 M18 FUEL Top Handle Chainsaws on October 30, 2025. The affected product is catalog number 2826-20, and only units where the fourth character of the serial number is the letter “A” are included. On these saws, the chain brake fails to stop the chain, posing a laceration risk. Two incidents have been reported, including one lacerated finger. Milwaukee sells this tool for about $350 as a bare tool or $790 with batteries and charger. Register at service.milwaukeetool.com/support/eservice and Milwaukee will provide a prepaid label, repair the unit, and return it to you at no cost.
DEWALT Recall
The DEWALT Grinder Flap Disc recall (July 3, 2025) involves about 17,680 Elite Series 4.5-inch 40G T27 High Density Flap Discs, models DWA8280HRT and DWA8280RT, with date codes 2024-36 to 2024-48. The ceramic abrasive flaps detach during use, causing lacerations. Three injuries were reported. These discs were sold at Grainger, Fastenal, Airgas, and Amazon from September 2024 through May 2025 for $7 to $10 each. To receive a refund, write “Recall” on the disc, upload a photo to dewalt.com/support/safety-notices-and-recalls/flap-disc-recall, and certify disposal of the disc.
Makita Recall
Makita recalled about 62,927 cordless grease guns and grease gun hoses on September 4, 2025. Models XPG01S1, XPG01SR1, and XPG01Z are affected, along with four hose model numbers (191A79-9, 191A80-4, 191W59-7, and 191W58-9). Holes develop in the flexible hose and allow grease to eject under pressure, posing a laceration hazard. Five incidents and five lacerations were reported internationally. Remedy is a free replacement hose. Contact Makita at 800-462-5482 or email [email protected] and reference your model and serial numbers.
What to Do If You Own a Recalled Tool
Acting quickly on a recall protects both you and anyone else who uses the tool. Follow these six steps as soon as you confirm your model and serial number are included.
- Stop using the tool immediately. Do not use it even once more, including to test whether it still works. Continued use is the primary source of recall-related injuries.
- Locate your model and serial number. These numbers are on the data plate, usually on the side of the housing, the base of the tool, or inside the battery compartment. Write them down exactly.
- Verify your unit on the brand’s recall portal. Each brand listed above has a serial number lookup tool. Confirm your specific unit is included before proceeding.
- Register for the remedy. Most brands require you to complete an online form. For most of the recalls above, no proof of purchase is required. Have your model number, serial number, and contact information ready.
- Follow the return or disposal instructions carefully. Lithium-ion batteries, for example, require special disposal at hazardous waste collection sites, not standard trash or recycling bins. The DR Power recall specifically requires photo documentation of battery destruction before a refund is issued.
- Call the CPSC hotline if a brand is unresponsive. Reach the CPSC at 800-638-2772, Monday through Friday. The agency has a process for escalating cases where companies fail to provide timely remedies.
For return-based remedies, most brands provide a prepaid shipping label. You do not need to pay out of pocket for return shipping on any of the recalls listed on this page.
How Recalls Work: The CPSC Process Explained
The Consumer Product Safety Commission oversees recalls under the Consumer Product Safety Act. Most recalls are voluntary, meaning the manufacturer works with the CPSC after identifying a defect, rather than being forced by a court or government order. However, the CPSC holds authority to mandate recalls for products posing an unreasonable risk of injury.
The standard process begins when a company receives incident reports from consumers or internal quality control. Once a hazard pattern emerges, the company contacts the CPSC, and both parties negotiate the scope and remedy. The CPSC then issues a public recall notice, which gets published on cpsc.gov and sent to registered subscribers. Manufacturers are required to notify retailers, distributors, and, where possible, known purchasers directly.
Recall remedies fall into three categories: repair, replacement, or refund. Repairs sometimes involve a firmware update (as with the Ridgid nailer) or a physical component replacement (as with the Ryobi pressure washer capacitor kit). Replacements provide a new unit. Refunds return the purchase price, sometimes prorated based on product age, as seen with the DR Power battery recall.
Federal law prohibits any person from selling a recalled product. If you see a recalled tool listed on a resale site or at a garage sale, report it to the CPSC at SaferProducts.gov.
Safety Tips While Waiting for a Replacement
Recalls sometimes involve a waiting period between registering and receiving the remedy. During this time, keep the following precautions in place.
- Store the recalled tool in a locked cabinet or out-of-reach location so no one else uses it accidentally.
- Remove or secure the battery on cordless tools so the unit cannot be powered on.
- For lithium-ion battery recalls specifically, store the battery in a cool, dry location away from flammable materials, and check it visually every few days for swelling or heat.
- Do not attempt to repair the defect yourself. DIY fixes void the recall remedy and often introduce new hazards.
- If you borrowed a recalled tool, notify the owner immediately and refer them to the brand’s recall portal.
- Consider a comparable rental tool from a home improvement store for time-sensitive projects rather than continuing to use a recalled unit.
Frequently Asked Questions
How do I search the CPSC website for power tool recalls?
Go to cpsc.gov/Recalls and use the search bar to enter the brand name or product type. Filter results by date range to focus on recent recalls. The CPSC also offers an email subscription service delivering new recall notices to your inbox as soon as they are posted.
Do I need a receipt to claim a recall remedy?
For most of the 2025-2026 recalls listed above, proof of purchase is not required. Ryobi, Ridgid, and Milwaukee all explicitly waive the receipt requirement. DEWALT requires only a photo of the disc and an online certification. Always check the individual brand’s recall portal, since requirements vary by product.
Is it illegal to sell a recalled tool?
Yes. Federal law prohibits the sale of any product subject to an active recall, including private sales and online marketplaces. Report any recalled tool for sale to the CPSC at SaferProducts.gov or by calling 800-638-2772.
What happens if I was injured by a recalled power tool?
Complete the recall remedy first to stop further harm. Then report the injury to the CPSC at SaferProducts.gov, which helps the agency track the true scale of a hazard. If you incurred medical costs, consult a product liability attorney, since the recall record itself is evidence of the manufacturer’s identified defect.
How long does it take to receive a recall remedy?
Processing time varies by brand and remedy type. Simple refunds and mailed kits typically take two to four weeks after registration. Tools sent in for repair or replacement often take four to six weeks due to shipping and service center volume. Milwaukee and Ridgid both use prepaid return labels, so you are not paying to wait.
Will CPSC notify me automatically if a tool I own gets recalled?
Not automatically, unless you registered your tool with the manufacturer at the time of purchase. Sign up for CPSC email alerts at cpsc.gov/Recalls and select “Tools” and “Outdoor and Garden Equipment” from the product categories to get notified of future recalls in these categories.
Final Thoughts on the Power Tool Recalls 2026 List
This year’s power tool recalls 2026 wave covers over one million total units across six active notices, with injuries ranging from lacerations to broken bones from exploding pressure washer components. The good news: every brand on this list is offering free remedies, and none of them require a receipt. Take five minutes to cross-reference your model numbers against the CPSC database and the brand portals above. For tools in your recalled power tools list, stop using them today and register for the remedy. The CPSC hotline at 800-638-2772 is available for follow-up if a company is slow to respond.
Leave a Reply